RAM 4.5 BUX II Series Manual de usuario descargar pdf (Pagina 51)

DE1 User Manual

Demonstration Setup, File Locations, and Instructions

• Project directory: DE1_Synthesizer

• Bit stream used: DE1_Synthesizer.sof or DE1_Synthesizer.pof

• Connect a PS/2 Keyboard to the DE1 board.

• Connect the VGA output of the DE1 board to a VGA monitor (both LCD and CRT type of

monitors should work)

• Connect the Lineout of the DE1 board to a speaker.

• Load the bit stream into FPGA.

• Make sure all the switches (SW[9:0]) are set to 0 (Down Position)

• Press KEY1 on the DE1 board to start the music demo

• Press KEY0 on the DE1 board to reset the circuit

Figure 5.3 illustrates the usage of the switches, pushbuttons (KEYs), PS/2 Keyboard.

z Switches and Pushbuttons

Signal Name Description

KEY[0] Reset Circuit

KEY[1] Repeat the Demo Music

SW[0] OFF: BRASS, ON: STRING

SW[9] OFF: DEMO, ON: PS2 KEYBOARD

SW[1] Channel-1 ON / OFF

SW[2] Channel-2 ON / OFF

• PS/2 Keyboard

Signal Name Description

Q -#4

A -5

W -#5

S -6

E -#6

D -7

F 1

T #1

G 2

Y #2

H 3

J 4

1 2 ... 46 47 48 49 50 51 52 53 54 55 56

Sin comentarios

RAM 4.5 BUX II Series Manual de usuario Pagina 51