RAM 6000 Información técnica Pagina 200

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 211
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 199
Software Manual 200
vendor DISPLAYSTRING
Manufacturer of the module/aircard.
Cellular Module manufacturer.
modelName DISPLAYSTRING
The vendor-provided model name of the modem/card/module (e.g.
sierra598U).
fwVersion DISPLAYSTRING
Firmware version of the module/aircard.
Cellular Module Firmware version #.
hwVersion DISPLAYSTRING
Hardware version of the module/aircard.
Cellular Module hardware version #.
carrier DISPLAYSTRING
Service provider for cellular network.
Cellular Service Provider.
lowRssi INTEGER32
Low Speed Received Signal Strength Indication.
Cellular High Speed received signal strenth indication. DEFAULT:0
lowEcio INTEGER32
Ec/Io is a ratio of good to bad energy, representing the cell towers "cleanness"
in its signal to you. In other words - signal to noise ratio.
Cellular Low Speed EC/IO. DEFAULT:0
highRssi INTEGER32
High Speeed Received Signal Strength Indication.
Cellular High Speed received signal strenth indication. DEFAULT:0
highEcio INTEGER32
Ec/Io is a ratio of good to bad energy, representing the cell towers "cleanness"
in its signal to you. In other words - signal to noise ratio.
Cellular High Speed EC/IO. DEFAULT:0
currentRssi INTEGER32
Current Received Signal Strength Indication.
Cellular Current Received Signal Strenth Indication. DEFAULT:0
currentEcio INTEGER32
Ec/Io is a ratio of good to bad energy, representing the cell towers "cleanness"
in its signal to you. In other words - signal to noise ratio.
Cellular Current EC/IO. DEFAULT:0
svcType DISPLAYSTRING
GSM, which stands for Global System for Mobile communications, reigns as
the world's most widely used cell phone technology.
CDMA, or Code Division Multiple Access, uses a "spread-spectrum" technique
whereby electromagnetic energy is spread to allow for a signal with a wider
bandwidth. This allows multiple people on multiple cell phones to be "multi-
plexed" over the same channel to share a bandwidth of frequencies.
Cellular Service Type.
currentChannel INTEGER32
Channels are used to different frequency range network to operate on the
same frequency in the same area that do not interfere with each other.
Cellular Channel.
cdmaType DISPLAYSTRING
None, Analog, Digital - High Data Rate type normally digital.
Cellular CDMA Type (e.g. None, Analog, Digital).
hdrType DISPLAYSTRING
Unknown, None, Rev0, RevA - The CDMA/EV-DO sub type.
Cellular HDR (e.g. Unknown, None, Rev0, RevA).
cdmaRoaming DISPLAYSTRING
Home, Roaming, Roaming - unknown. Roaming type indicator inside or out-
side the providers home network.
Cellular Roaming indicator - CDMA.
Vista de pagina 199
1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 210 211

Comentarios a estos manuales

Sin comentarios