RAM 6000 Información técnica descargar pdf (Pagina 16)

Software Manual 16

Cellular Configuration

Activation Status column: See table below for a description of the different statuses found in the “Activation Status” col-

umn.

2.1.1 Cellular Interface Configuration

• Select Yes to enable the interface so it becomes active after the new settings are applied and upon subsequent

system start-up. Select No to disable the cellular connection feature. More information on setting up the unit’s

cellular connection can be found in section 3.4.1.

2.1.2 Set the User Name, Password and APN

If you are using a GPRS, Edge or HSDPA based card, enter the User Name, Password and APN that was provided by your

cellular carrier. This information should have been packaged with your SIM chip. If you do not have this information,

please contact your carrier’s account representative or the carrier’s support department before proceeding.

Click the “Apply” button to save and activate the configuration.

Note: The User Name, Password and APN can be case sensitive. Be certain that you use the exact information as provided

by your carrier.

CDMA HSPA/LTE

Running - Connection/Activation is running Not Reg - Modem not registered

Waiting - Connection/Activation tried and failed. Will

retry in 20 mins.

Reg Home - Registered on Home Network

Succeeded - Connection/Activation successful Searching - Searching for connection

Unavailable - Connection/Activation not supported Reg Denied - No SIM or SIM no longer activated

Failed - Connection/Activation Failed Unkn Stat - Unknown status

Available - Activation not running/Module has not tried

to connect/Module already activated

Reg Roam - Registered on roaming network

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 210 211

Sin comentarios

RAM 6000 Información técnica Pagina 16