RAM 4.5 BUX II Series Manual de usuario descargar pdf (Pagina 9)

Jianjian Song LogicWorks 4 Tutorials (5/15/03) Page 9 of 14

When you pick a pin in the pin list on the left, its type will be shown in Pin Function List.

A pin type can be changed by selecting one of the pin functions. Set pins R, F, and L as input pins

and LEFT and RIGHT as output pins.

Save the symbol as a new device in my_library with any name you want to call it.. You can add

other text on the symbol to make it easier to identify such as pin numbers and pin names.

Open the turn-signal sub-circuit. Open a new design window in File->New. Select the new

symbol from my_library to construct a turn-signal circuit with probes on the outputs and binary

switches on its inputs.

Highlight the new symbol by clicking on it. Select Attach Sub-circuit in Schematic

Menu. Select the turn-signal sub-circuit and click Attach.

You will see the sub-circuit schematic. Choose Pop Up in Schematic menu to go to the top

level so that you can see the symbol.

Verify your new turn-signal circuit by switching the input signals at the top level.

3.10 Edit a device from a library

To edit a device symbol from a library, choose the device and then right click on the device to

open a device edit window. The device symbol can then to be changed.

To change the underlying circuit for the device, select Subcircuit and Part Type in Option and

attach the edited subcircuit to the device symbol.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

RAM 4.5 BUX II Series Manual de usuario Pagina 9